A custom 2″ tow hitch receiver for the Nissan GTR. This receiver bolts on to your rear factor tow hook mount and you can install any hitch mounted accessory in minutes. Removes just as easily — leaving no marks, no signs it was ever there.
This receiver is an Auto Technology Repair original — created with carrying two bikes of equivalent size or weight in mind.
It should be noted that we have not tested the limits of this mounting location and do not guarantee safety hauling over 100 pounds. The mounting location of the GTR was designed to support a 4,000 pound car.
This tow hitch receiver has been crafted of sturdy steel and painted to protect from rust. It is a standard 2″ square tube and will accommodate a 3.5″ deep hitch. Pin holes are located at 1″ and 2″ from the tip of the hitch to center of hole. Please measure your hitch before ordering — contact us if you require a deeper hitch receiver.
Hitch receiver is standard 2″ square tube and will accommodate a 3.5″ deep hitch. Two pin holes have been drilled – One at 1″ and one at 2″ from tip of hitch to center of hole. Please measure your hitch before ordering and contact us if you require a deeper hitch receiver.
This hitch receiver will come complete with a grade 8 mounting bolt and lock washer. Torque the bolt to 85 ft/lbs, and recheck torque every trip or every 50 miles
We are not responsible for any damage caused by misuse or overloading
Final notes, this tow hitch receiver was developed to tow trailers or other wheeled objects. It is limited to one mounting bolt at your bumper reinforcement and should not be subjected to excessive force.