Call Us (480) 795-7199

ATR Version 3.5 Nissan GT-R R35 Upgraded Bell Housing

$4,989.00

This price includes a rebuilt ATR bell housing which comes with a 5 year bearing warranty (see additional details).  We require your old bell housing as a core.  Any bell housing shipped without a core must include the core charge (please add on the core charge before checkout).

What to expect with your ATR housing:

  1. Eliminated bellhousing rattle
  2. Hardened steel insert sleeves to eliminate bearing movement
  3. Upgraded Japanese made Nachi bearings
  4. ETS billet shaft and damper disc (rated for 2,000+ horsepower)
  5. A used aluminum bellhousing that has been media blasted for a cleaner look
  6. ***POWDER COATING IS OPTIONAL, AND FOR ADDITIONAL FEE***
  7. Installation is available at our Gilbert, AZ facility.  Add on installation fee for full service repair
  8. Bellhousing will be shipped in a reusable box for you to return your core in

Considerations for choosing your replacement bellhousing:

  1. V1 bellhousing is tried and true, and found to be quite reliable on cars up to 800 horsepower AND comes with a one year labor only warranty on the housing (not the disc)
  2. V2 bellhousing is recommended for cars with 800-1600 horsepower.  V2 comes with a modified shaft and output flange that GREATLY reduces the likelihood of future failure AND a 5 year parts only warranty on the housing (not disc)
  3. V3 bellhousing is recommended for cars in excess of 1600 horsepower and comes with an ETS billet shaft and damper disc.  There is no warranty on the housing.  The shaft and disc come only with ETS’s limited warranty against defect

We have sold hundreds of housings all around the world, get yours today!

 

HOUSINGS ARE CURRENTLY TAKING 1-3 WEEKS TO SHIP.  PLEASE CALL US AHEAD OF TIME IF YOU ARE UNDER A TIME CONSTRAINT

 

 

Frequently bought together

VP Racing Fuel Jug Quick Pour Hose - Jug Blaster 5000

We've all been there before - Trying to empty your 5 gallon VP race jug into the car at home or on the track... For us it's usually in Arizona and 105 degrees out.  The supplied hose will kink and also flow very slowly, allowing fuel to drip out the vent valve on the jug.  You're left with an awkward and inadequate mess.

We've taken the time to fix this inconvenience!  Our 1" fill hose with machined aluminum fittings will cut that task down to a mere 55 seconds, AND will not spill fuel in the process!  Take a look at our comparison video HERE

 

Please notate this filler hose has not been tested on all vehicles.  It may not function well on vehicles that have a safety flap on the top of your vehicle's fuel filler neck, as the hose head will not depress this type of flap.  This hose HAS been tested on the R35 Nissan GTR (our specialty) and works fantastically!

 

Included in this set are two machined hose end fittings, a machined cap, and 11" of ethanol compatible 1" inner diameter nylon reinforced PVC hose.  PVC holds up well to alcohols, but will harden over time if you're pouring gasoline.  Have no fear, this hose is very inexpensive and can be found at most hose and hardware stores.  The aluminum fittings however, are precisely machined and will last a lifetime.  This kit has ONLY been proven to work on the standard VP 5 gallon fuel jugs - You will need to use the jug's large cap with our hose kit

Product Description

Benefits of Our Bell Housing

Purchasing an auto part online should never feel like an ordeal. ATR makes it easy for you to know precisely what you are getting. You can expect the following benefits right away, that are only available in our V3.5 bellhousing.

  • Hardened steel insert sleeves that eliminate any bearing movement
  • Upgraded Japanese-made Nachi bearings
  • ETS billet damper disc and main shaft
  • ETS shaft is modified just like our V2 housing to prolong bearing life
  • Rebuilt housing will be media blasted for cleaner finish
  • Shipped in a reusable box for you to return your core in

ETS Billet Damper Disc & Shaft

Extreme Turbo Systems is proud to release the industries first billet spring plate with heavy duty springs. Around 1900whp the springs on the factory spring plate bottom out causing the factory spring plate to crack. We’ve designed an all billet spring plate and hub assembly with heavy duty springs capable of supporting over 3000whp! This is a must for anyone looking to competitively drag race their GT-R.

Damper disc Features:

  • Billet Spring Plate
  • Billet Hub
  • Heavy Duty Springs
  • Capable of supporting over 3000whp!

Note: Spring plate does need to be balanced.

Billet shaft Features

  • 300m Billet Input Shaft
  • Heat Treated
  • Eliminates Stress Risers
  • Supports over 3000whp!

Extreme Turbo Systems is proud to release the industries first billet input shaft capable of supporting over 3000whp! The factory shaft is prone to crack and fail around 2000whp. Input shaft failures are catastrophic and typically take out the bell housing and driveshaft causing an immense amount of damage. This is a must upgrade for anyone pushing over 2000whp.

Signs of Damaged Bell Housing

A failed, or broken bellhousing will exhibit a rattling noise at idle, while stopped at a red light, and at low speeds.  The rattle is caused by the shaft moving around inside a damaged housing or a bearing failure.  Our upgraded V2 housings will eliminate future failures

A failed bellhousing sounds like this

Warranty

As with any component, it is important to remember that accidents can and will happen. Every V3 Bellhousing ONLY comes with ATR and ETS’s limited warranty against product defect.  Please note that ATR will not pay installation labor in any situation, we will be limited to the replacement value of the bellhousing.  We will cover shipping to and from our facility for the first year only.  A defective housing must be returned for inspection before new housing is shipped.  Alternately, you can purchase another housing and we will refund once we have received a failed housing back.  In the event of a failure, we will replace the bearings on your existing housing – we have never had a housing failure, aside from a defective or failed bearing.

The ETS shaft and damper disc come with a ONE year parts only warranty against defect

In over three years of manufacturing and selling this product, we have helped many clients to diagnose continuing drivetrain noise.  If you suspect a failed housing, please check all exhaust (including down pipe brackets above bellhousing), make sure all bolts are properly torqued on bellhousing, disc, driveshafts, and exhaust before starting a claim.  In some situations you may notice a rattle when the engine engages from a stop.  This is usually a result of a software tune that requires adjustment, and not a bellhousing issue (call or email us for more information on this).

  • We will warranty ONE bellhousing defect.  If the bellhousing fails a second time, we may opt to issue a full refund upon return, inspection, and confirmation of failure at our discretion
  • Our warranty does not cover labor costs, unless you have the bellhousing installed at our Gilbert, AZ facility – Highline Car Care
  • Our liability is limited to the purchase price of ATR bellhousing plus shipping

 

Pre-Paid Core Charge

When purchasing your upgraded Auto Technology Repair Bell Housing, you must do one of two things:

Send Auto Technology Repair your core first so that we get the part before we ship out the bellhousing.
Pay a refundable $400 core charge up front and we’ll send you the bellhousing immediately.
Should you choose to ship your old core first, once Auto Technology receives your rebuildable core, you will receive a full refund of your core deposit. The cost of return shipping will be up to you.

Powdercoat Housing (Optional)

Not only will the part improve your car’s performance, but it can also enhance the aesthetic.

We will ship you the housing in any color you like. All you have to do is visit this link to see the selection of colors available. You have your choice of virtually any color you like, including:

  • red
  • yellow
  • orange
  • purple
  • blue
  • black
  • green
  • and many others.

Auto Technology Repair typically keeps the orange bell housing in stock because it is practically identical to the original equipment manufacturing brake caliper color. You should bear in mind the housing will not remain a show quality finish. For instance, you may notice some imperfections and casting marks within the housing. Fortunately, you can rest assured knowing the finish will still be exceptionally durable.

In the event you do want a show quality finish because you plan on showing your GT-R off in shows, then you need to contact us well in advance to discuss your options. However, you should remember that all powder coating is optional. It comes with an additional fee.

Reviews

There are no reviews yet.

Be the first to review “ATR Version 3.5 Nissan GT-R R35 Upgraded Bell Housing”

Your email address will not be published. Required fields are marked *

ASE Certified Technician Video Call

This option allows you to schedule a video call (ONLY during business hours) with an ASE certified technician to assist in removal, installation, or replacement of any product we sell. We will email to setup an appointment M-F 9am-4pm. Please call us after placing order if the matter is urgent 480-795-7199.

We will strictly limit video calls up to 2 sessions and up to 15 minutes TOTAL time.

Full Service Install

Add this option if you would like to bring or ship your vehicle to our shop for full service replacement. Auto Technology Repair is owned and operated by Highline Car Care, a 5 star facility in Gilbert AZ.

You will need to schedule a visit after purchasing. Please allow 2 days for install.