Toyota Prius MFD Touch Screen Repair


Is your Toyota Prius MFD Touch Screen Digitizer Unresponsive to Touch?

Auto Technology Repair has the solution for you! 

Many 2004 and newer Toyota Prius models have experienced this failure – Your multi function or navigation display will light up as normal, but does not respond to your touch. 

In many cases this can leave you without access to your Bluetooth or climate control, a very frustrating issue. In most cases this is caused by a failed ribbon cable on your touch screen digitizer.

This can be repaired by the pros at Auto Technology Repair for a very reasonable price, and with a very quick turnaround and 12 month warranty.  99% of the time, we have the repair parts in stock and can perform the service the very same day!

Does your Toyota Prius Multi-Function Display Fail to Power up?

This issue is not nearly as common as a failed digitizer, but it does occur.  We have traced this back to a failed circuit board (PCB). 

While we can replace this PCB, we have often found it to be more economical to provide a used, good condition MFD in place of the failed unit. 

In either case, if your Prius MFD screen is blank or black, the pros at Auto Technology Repair can get you back up and running. 

Click HERE to order parts for do-it-yourself repairs.

Local to the Phoenix Area?

Stop by and see us at our repair facility – Highline Car Care in Gilbert, AZ.  We can provide full service repair, walk in repairs, or parts only.  Please make sure to call or email first.

Looking to perform a DIY MFD Digitizer Replacement?  Here’s a video you must watch first!

Need Your Screen Repaired?

It takes someone who understands the technology in your car to make the necessary repairs.

If you have any questions about the digital screen in your car, contact us below!