Ford Sync 2 MyTouch Screen Digitizer Repair

Auto Technology Repair in Mesa AZ Repairs Factory Navigation Touch Screens, Including Ford Sync Systems

Is your Ford or Lincoln Sync 2 on the fritz?  Is your navigation touch screen black, blank, scratched, cracked, distorted, or otherwise less than perfect?  The pros at ATR will make short work of the situation and get you right back on the road!  For the past 8 years, this is how we have made our name in Mesa AZ.  Our owner Wes prides himself on staying on top of new technology and providing value based repairs on all types of automobiles.

 

Take a Quick Look at Wes in Action, Replacing the Touch Screen on a Lincoln MKX

 

Ford C-Max, Escape, Explorer, F150, F250, F350, Focus, Fusion, along with many Lincoln models with Sync systems can all be repaired by the Pros at Auto Technology Repair.

Click HERE to purchase parts for DIY touch screen repair.  

 

 

Nissan GTR R35 Bellhousing Repair

ATR-nissan-GTR-upgraded-bell-housing-auto-technology-repair-gilbert-az

An upgraded housing with optional burnt orange metallic powdercoating, by ATR

Nissan GT-R R35 Bellhousing Rattle Repair in Mesa, AZ

The R35 (2008+) Nissan GT-R is plagued with a weak link – The transmission bellhousing.  When designing the R35, Nissan installed the transmission at the rear of the vehicle which then required a bellhousing to be installed at the rear of the engine, and a drive shaft to connect the two.  Chevy had been doing this for years with its Corvette, but with one major difference – a torque tube to physically connect the engine to the transmission.  Being that Nissan opted not to do this, the engine and bellhousing have the opportunity to move (very slightly) independently from the transmission in the rear.  This results in a large amount of push and pull in the drive-train, and it turns out that the bellhousing shaft bearings are the weak link in this system.  Over time they will damage the aluminum housing and eventually float freely.  This results in a fairly noticeable rattle (even my wife noticed it on mine!).  The bellhousing would eventually require replacement – Until the folks at ATR developed a fix.  We take damaged housings, bore them out to accept two hardened steel inserts, and new bearings are pressed into these inserts.  This results in a design that is much less prone to failure.  Remember, your driveshaft will still be pushing and pulling on these bearings, they WILL fail over time – there is no dodging this.  The good news is the ATR housings are relatively inexpensive to repair once failed.  Most times, a set of new bearings will resolve the issue.  We feel this is a much stronger AND more cost conscious option, so much so that we offer a 12 month (parts only) warranty on our bellhousings for all GTR’s running under 800 horsepower.

What Does a Failed GTR Bellhousing look like?

Take a look at this quick “before” video to see what exactly happens to a failed housing

Want to Have Your GTR Bellhousing Repaired Today?

Auto Technology Repair is owned and operated by Highline Car Care.  Highline is a full service auto repair shop with EXCELLENT reviews (Seriously, check them out HERE).  We are happy to provide a full service repair and can usually even have your car in and out the very same day!  We typically stock a couple modified housings on the shelf that are ready to go.  We can also ship our bellhousing to you or your preferred installer, we have shipped these as far as New Zealand and Dubai.  We will want your old housing back when done, so we do charge a refundable core fee up front.  We can rebuild your exact housing as well, if this is something you prefer.  Just keep in mind, turn around time will be 2-3 weeks.  Ready to buy?  Click HERE

 

 

 

 

Lexus IS Navigation Unit Removal and Repair

Lexus IS Navigation Unit Repair by Auto Technology Repair

The 2006 and newer Lexus IS250 IS350 and IS-F models have experienced a very common rate of Navigation Unit Failure.  But have no fear, the folks at Auto Technology Repair have done the research to get you back up and running in a very timely, affordable, and reliable manner.  Several years ago, as these vehicles began to fall out of their factory warranties we started receiving phone calls from our customers.  Navigation touch screens were becoming unresponsive and stopped responding to touch, or worse yet – The screens went completely blank.  This leaves the vehicle’s climate control, radio, navigation, and Bluetooth functions inaccessible.  If you haven’t purchased your parts for repair yet, please click HERE.  If you’ve already purchased your parts from Auto Technology Repair, check out the videos below.  Remember, we will always provide this information FREE of charge.  All we ask is that you consider us as your number one U.S.A based OEM navigation unit repair vendor.  We offer a 12 month warranty on all DIY parts, and a 24 month warranty on all full service repairs.

 

Lexus IS Model Navigation Unit Removal for Repair

 

Lexus IS Navigation Unit PCB Circuit Board Replacement

 

Lexus IS Navigation Touch Screen Digitizer Replacement Repair Service

 

Contact Auto Technology Repair (A division of Highline Car Care) in Mesa, AZ for Full Service Lexus IS Navigation Unit Repair

 

 

 

 

Cadillac CUE Navigation Unit Touch Screen Replacement

How-to Videos for our DIY Cadillac CUE Touch Screen Customers

As you likely already know, the CUE touch screens have become very problematic and Cadillac has yet to provide an economical solution.  Screens become cracked, speckled, distorted, spider-ed, and unresponsive on many 2013 and newer CUE units.  That’s what motivated us to provide a reliable and affordable solution to our customers in Mesa Arizona.  We began receiving phone calls shortly after these vehicle’s factory warranties had expired, and customers told us that the Cadillac dealers wanted up to $2500 to repair what seems to be a factory defect.  They do not have any extended warranty coverage, and there is yet to be a recall issued by GM. We did our research, tested many products, and feel that we have come up with the most reliable and cost conscious fix available.  If  you haven’t purchased a replacement screen yet, please take a look HERE.  If you’ve already purchased and received your product, take a look at a recent video the folks at Auto Technology Repair have made to help you replace your Cadillac ATS CTS Escalade SRX or XTS touch screen (Towards the bottom of this page).  And remember, we are providing this information FREE of charge, all we ask is that you consider us as your trusted LOCAL U.S.A supplier for all of your OEM touch screen repair parts.  We offer a 12 month warranty on all DIY parts, and a 24 month warranty on all full service repairs.

Cadillac XTS CUE Display Removal

 

Cadillac SRX CUE Navigation Unit Removal

 

Cadillac CUE Touch Screen Replacement for DIY

 

Contact Auto Technology Repair (A division of Highline Car Care) Today for Full Service CUE

Navigation Touch Screen Repair